Industry News

The solution of cutting malfunction of fiber cleaver

0 TUMTEC 2018-07-26 09:52:42

The solution of cutting malfunction of fiber cleaver

            By Tumtec 2018-08-20

Malfunction cleaving may be caused by the following reasons:

1. Wrong position of fiber, and no straight 

Please place the fiber straight.

2. The blade is too high

Please adjust the height of the blade.

3. Foreign matter such as dust on rubber pads or clamps

Please clean the rubber mat or clamp.

4. Dust and other foreign objects on the blade

Please clean the blade.

5. Foreign matter such as dust on optical fiber

Please strip the fiber again, clean it with alcohol, and wipe the bare part carefully.

< >
Technical support:baiila sitemap